In your X61s this drive is like semi external. But If you have seen sata cable for x250 - it is very thin an i was afrightened that it can simple melted when i have connected this big disk? but it have worked ok.Īnd main question to OP. Once apon a time i have started X250 with this huge drive. But in my case it seemd that drive can rewrite data even after it reports to OS that writing is done. Before this i belivied that such drives became very slow on random writes to recreate right shingled structure. and drive continued to spine its platterns and audible move heads. Once apon a time i have turned off T410 thinkpad, but this hdd was connected to yellow (allways powered on) USB port. But if drive will be connected to SATA (or other enclosure) it will work in terms of 512b sectors and all partitions will shrink 8 times.Īll of this drives use SMR technology whish can be very frustruating in terms of writing performance. BUT this drive must be tailored to this adapter (enclosure) because old BIOS partition table will denote partition boundaries in terms of 4k sectors. Any OS can use these drives (even XP) without any issues. It uses 4kb sectors to address data on wire. USB adaptor in original seagate enclosure have some magic in it. GPT partitioning can be done, but 32bit OS (especially my beloved XP) will render this drive useless. Any manipulations with 1.9Tb + 1.9Tb partitioning won't work. And at this point i have stumbled with 2Tb limit. Next part - is to use it in external usb enclosure. but 15mm is to tall to fit in 12mm caddy. First attempt i have made is to put it in 12mm ultrabay adaptor (to work with W700, W530). After some time i've got 4Tb disk without any enclosure. Some notes of my experience with this 15mm drives.įirst of this drives in my posession was 2Tb seagate external drive and it have worked very well. How are you going to overcome the 2TB limit for using Legacy BIOS to boot any OS then? Then I will close it with some more distance and raise the laptop with higher stands. The next step will be to modify the chassis base by cutting the hard drive bay plastics so the hard drive will fit. I booted with Windows 7 install to see if it is showing the partitions on the drive and it works. So I removed the keyboard and palm rest, to give the harddrive some space I also removed the screws that hold the mainboard. The drive I intend to use are the ones out of the Seagate backup plus portable which is a Seagate Barracuda 4Tb.įirst I needed to test if the drives where supported. So that's why I decided to test if they support bigger drives.Īs the X61 have a drive bay for 9mm drives the options are SSD's which are expensive or modding the thing so it will fit 15mm drives. The Thinkpads Core 2 Duo 2Ghz with 4Gb of ram, plays HD quality clips at the VGA output like a charm.Ĭombined with the Creative Audigy 2ZS PCMCIA card it is a portable DJ tool with good audio quality. My loved Thinkpads X61's (I have 5 of them) are getting a massive harddrive update.įor now I run 3 of them with the Seagate Firecude 2Tb drives which runs very smooth.īut for a DJ that uses it to play Karaoke, Videoclips and music the 2Tb drives are filled with to the max with data.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |